When a malfunction is detected, the Bauknecht washing machine displays an error code on the display. Its value allows the user to independently find the breakdown in the AGR and try to fix the problem with their own hands.
In the article we will tell you: what does the fault code mean, what are the reasons for its appearance, how to fix the breakdown at home.
CMA Bauknecht error table (Bauknecht)
Error code | Value | Reason for occurrence | How to fix the situation |
Fh | There is no water in the tank. | Why the FN error was displayed on the scoreboard:
| What do we have to do:
|
F02 | The code means that there is no draining of water for 4 minutes. | A Bauknecht washing machine generates an F02 error if:
| Solution to the problem:
|
F05 | Thermal sensor failure. | The reasons:
| To reset the error Ф05, check the health of the temperature sensor and its contacts with the heater and the heater relay. |
F06 | Code F06 is on if there is a breakdown in the engine Hall sensor. | For what reasons the error code was displayed:
| How to solve a problem:
|
F07 F15 | The triac of the electric motor burned out. | The triac on the control board is faulty, which is responsible for the operation of the SMA engine. | How to fix the situation:
|
F08 F12 | Problems with the electric heating element SM. | The reasons for the appearance of the code F08 or F12 on the screen of SM Bauknecht:
| Your actions:
|
F09 | Too much water in the tank. | What happened:
| What to do:
|
F10 | The motor heat absorption device gave an MCU signal. | Why is this happening:
| How to decide:
|
F11 | Broken contacts between engine and control panel. | The wiring was damaged, the connections went away, the contacts burned out. | Check connectors and replace. |
F13 | Faulty dispenser (water distribution mechanism). | Problems with the connections or the dispenser itself. | Check connections and dispenser. |
F14 | Non-volatile memory failure (EEPROM) | A short circuit caused the board to break. | Reboot the washer by disconnecting it from the network for 15-20 minutes. Inspect the board. |
Sud | Too much foam. SUDS LOCK protection triggered. | Causes of an error in the AGR:
| Independent solution:
|
Fdl | Problems with closing the hatch door. | Because of which:
| How to fix:
|
Fdu | The door is jammed. | 1. The castle broke. 2. The electronic lock is defective. 3. The connection to the module is broken, or the electronic board is faulty. | All items are checked, broken items are replaced. |
By examining the error codes of the Bauknecht washing machine and their meaning, you can detect and diagnose a breakdown.
Engage in self-repair or call the master - you decide.