Appointment
The Bosch GKS 190 hand-held circular saw is a professional tool with a powerful engine. The equipment has high performance, is used in private households, small workshops, workshops of large enterprises.
Circular hand saw performs longitudinal and transverse sawing of workpieces made of wood, plastic, aluminum.
Advantages
The advantages of manual equipment:
- the tool is equipped with a powerful engine (1.4 kW), which allows you to process hard wood;
- the ability to make corner cuts at an angle of 56 ° significantly expands the scope of the device;
- optimal dimensions, low weight give the power tool high mobility;
- built-in turbofan creates a powerful air flow in the sawing area, removes dust, chips;
- saw blade guard helps create safe working conditions for the saw.
Design
Equipment device:
- The case is made of dense plastic, equipped with an ergonomic rubberized handle with a soft start button.
- The saw blade is capped at the top.
- The unit rests on the workpiece with an aluminum cast sole.
- The handle has two-way lock keys.
- The rotary device allows you to cut at an angle of up to 56 °. In the front part there is a metal arc with a marking of the tilt angles of the saw. The rotation is fixed with a thumb screw moving in the slot of the arc.
- The built-in turbofan removes particle dust from the cut-out line during operation.
- A parallel stop is fixed on the tool body, providing a straight line of longitudinal cut in a wooden workpiece.
- A parallel stop at one end is clamped with a screw on the body of the circular saw. The second end of the L-shaped form abuts against the longitudinal edge of the wooden blank with a vertical face.
- The stop leads the saw blade along the even edge of the workpiece.
Stationary position
In some cases, craftsmen use the saw in a stationary mode. To do this, the tool is attached from below to the worktop so that the cutting part of the disc passes through the groove at the top of the table. Cut height decreases by tabletop thickness. Despite this, by tricks to achieve the maximum value of the height. In this form, the equipment turns into a full-fledged stationary machine.
Specifications
The accompanying documentation is enclosed in the packaging of the power tool, which indicates the operational properties of Bosch GKS 190:
- type - a hand circular saw;
- electric motor power - 1.4 kW;
- handle - with a rubber sheath;
- case - from high-strength polymer;
- maximum disk rotation speed - 5500 rpm;
- Ø saw blade - 190 mm;
- Ø disk seat - 30 mm;
- maximum cut depth - 70 mm, at an angle of 45 ° - 50 mm;
- dust extractor - compatibility with a household vacuum cleaner;
- packaging dimensions - 400 x 320 x 290 mm;
- tool weight - 4.2 kg.
Package Contents
When you receive an order in a parcel box, it usually contains:
- Circular Saw;
- instruction for use;
- parallel emphasis.
Recommendations for use, instruction
Instructions, download the .pdf file, size 8.78MB.
When working on equipment, you should adhere to the rules:
- Keep the tool out of the reach of children.
- At the end of the shift, the unit must be thoroughly cleaned of dust and dirt.
- Operate, store the circular saw in a warm, dry, well-ventilated area.
- When the slightest backlash appears in the moving parts of the tool, you must immediately eliminate this drawback yourself or contact a repair shop.
Manufacturer and prices
The developer of the model is the German company Bosch. Products are delivered to Russia from China.
The prices for a circular saw are presented in the table.
Seller | Cost, rub. |
"All tools" | 7911 |
"220 volt" | 7910 |
APORT | 8200 |
OZON.RU | 7911 |
"DNS" | 7999 |
Reviews
Share your experience in using the machine in the survey and comments.