Gas boiler "Fondital" - products of the Italian manufacturer, producing floor and wall type heaters. A variety of design solutions are used in the production, one-and two-circuit models are offered to the consumer. In the model range of mounted boilers, in addition to the classic versions, there are also high-performance innovative condensation-type apparatuses.
About company.Fondital is an Italian company founded in 1970 by Silvestro Niboli. Over the years of development, the company has transformed from a small enterprise into a company that occupies a leading position in the global heating equipment market. The manufacturer owns its own research centers in which innovative developments are being conducted. The company invests tremendous funds in the creation of technologies aimed at preserving the environment and non-waste production. That is why Fundital products are an example of environmental safety and energy efficiency.
Benefits
- Seven steps for quality control - marriage is virtually eliminated.
- A network of service centers in the Russian Federation.
- Silent work.
- A combination of European quality and affordable cost.
Disadvantages
- Problems when the coolant does not meet quality standards, malfunctions arise.
- Lack of water treatment causes breakdowns.
- Requires installation of a voltage regulator.
- Original spare parts are needed, they have to be bought for the full European cost.
- Atmospheric heaters are sensitive to pressure drops in gas pipes. If the pressure drops in the line, the automation simply does not allow the device to start work.
Do you need a fondital
Given the serious list of shortcomings, it’s worth buying boilers of this brand only if there is a service center in your city. Its specialists will install and configure the device, provide service, and troubleshoot.
Important! If you do not provide a water treatment system, Fondital boilers may fail after a year of operation. And without voltage stabilization, the automation will burn out at its first jumps.
What Fondital Offers
The range of "Fondital" has about 30 modifications, differing in characteristics, design, principle of operation and name. Wall-mounted are represented by two dozen, and floor-mounted - by one dozen different boilers. Combine their parameters of quality, reliability, compliance with European environmental standards.
When choosing a suitable model, you need to consider:
- Type of boiler. Wall and floor options differ not only in the installation method, but also in the power on which the heating area depends. You also need to consider fuel consumption. For example, to heat 200 m², 2.5 cubic meters per hour is enough.
- Type of combustion chamber. There are two options: closed and open. The latter is a classic version of a gas boiler. Such heaters are also called atmospheric. They are more reliable, but their installation is fraught with a number of requirements: you need a separate room, chimney, ventilation, etc. Closed chambers make it possible to save fuel more efficiently; air is supplied to them, gases are removed through a coaxial chimney.
- Heat exchanger. It affects the speed of heating the coolant. If the bithermic variant is used, the water in the domestic hot water is faster and the cost of the heater is reduced.
- Built-in boiler. Some modifications are equipped with a storage tank. This solution allows you to get hot water almost instantly after opening the tap. The capacity of the boiler can reach 90 liters.
Installation and operation
According to consumer reviews, most of the problems in the operation of Fondital heaters are associated with errors in their installation, configuration and start-up. All these works must be performed by service center employees. When installing, note that:
- A voltage stabilizer, uninterruptible power supply are needed.
- Atmospheric models are sensitive to pressure drops, and in condensation models this problem is solved thanks to adjustment. By adjusting the gas valve, you can simultaneously reduce heating costs.
- Harness and installation of equipment must comply with the requirements of the manufacturer. If desired, you can install remote thermostats - internal and external.
- If necessary, the devices are converted to liquefied gas. For this, special nozzles are purchased.
Mounted models
Wall-mounted appliances are in high demand among ordinary consumers purchasing gas equipment for heating homes. The manufacturer divides the entire lineup into two large categories - floor and wall. Among them there are atmospheric and turbocharged versions. Condensing boilers are allocated to a separate group, saving consumers up to 30% of energy resources.
ANTEA
Condensation type. Pre-mixing the air-gas mixture. Dual-circuit - there is a DHW circuit. Turbocharged - the furnace is closed. Compact, easy to place. Equipped with an 11-section stainless steel burner. For example, the characteristics of the Antea CTFS 24 AF:
- Heating capacity - 25.5 kW.
- Weight - 22.5 kilograms.
- Efficiency - 93.1%.
- Expansion tank - 7 l.
- Dimensions (HxWxD) - 70x40x25 cm.
- It can heat up to 191 m².
- Fuel consumption - 2.7 m³ / h.
It features simple controls. Has an LCD display.
Victoria compact
Wall unit with two circuits. Flow-through heat exchanger. Compact, suitable for a small room. Equipped with a hydraulic kit for connecting to solar heat supply. Features of Victoria Compact CTN 24 AF:
- Power - 24 kW.
- Weight - 28.4 kilograms.
- Efficiency - 93%.
- Expansion capacity - 6 liters.
- Dimensions (HxWxD) - 70x40x25 cm.
- The heating area is 180 m².
- Fuel consumption - 2.7 m³ / h.
- Estimated price - 28,000-30,000 rubles.
“Victoria Compact” is produced in two versions: atmospheric (open firebox), with forced draft (closed firebox). Copper heat exchanger. There is a control system: LED bulbs signal changes in operation. There is frost protection. Also available is a system against blocking the pump.
The second modification of "Victoria Compact 24" - CTFS 24 AF - has a higher efficiency - 93%. Weight - 28.4 kg. Heating capacity - 23 700 watts.
Itaca CTFS
These wall-mounted devices with a capacity of 24–32 kW have two circuits, a DHW flow heat exchanger. Features Itaca CTFS 24:
- Heating capacity - 23 700 watts.
- It weighs 38 kg.
- Efficiency - 93%.
- Expansion capacity - 10 liters.
- Dimensions (HxWxD) - 75x42x31.5 cm.
- The heating area is 180 m².
- Gas consumption - 2.7 m³ / h.
- The approximate cost is 45,000-50,000 rubles.
Equipped with a touch screen. There is a quick start function, providing comfortable use of hot water. The plate heat exchanger is coated with polyurethane insulation that retains heat. Management of two zones of heating by means of external temperature sensors. There is a built-in chromothermostat that allows you to set the program for the day ahead. Three types of solar collectors can be controlled.
Itaca CTFS is the pinnacle of the Fondital line of boilers.
Minorca CTFS 9
The low-power wall-mounted apparatus Minorca is designed to heat 74 m² of area. Its heating capacity is 9.3 kW. Two circuits. Fuel consumption is small - only 1.1 m³ / h. Such a device costs 27,000-30,000 rubles. Efficiency - 89.9%.
Tahiti Condensing Line Tech KR 55
Powerful condensing heater with high efficiency - it reaches 107%. One circuit. Equipped with a wide LCD display. It has a low level of harmful emissions.
- Heating capacity - 58 800 watts.
- Weight - 53 kg.
- Broad tank - 10 l.
- Gas consumption - 5.82 m³ / h.
- The approximate price is 100,000 rubles.
The power of the burner is modulated. Protected against freezing. Complete bypass. NTC temperature sensor. If necessary, a boiler is connected. There is a remote control.
Floor models
Floor-mounted models are available in a wide power range - from 20,000 to 350,000 watts.
Bali
Designed for heating private homes. Equipped with a storage boiler. Case material - heavy-duty cast iron. Easy to manage and maintain. Technical Parameters of Bali RTN 18:
- Heating capacity - 18 kW.
- Weight - 114 kg.
- Cumulative boiler - 60 liters.
- Material - stainless steel.
- Designed for 180 m².
There are two versions:
- BTFSE - with forced traction;
- BTNE - with natural draft.
These high-performance boilers are available in a wide range of capacities, you can choose the option for any heating area.
Madeira
Condensing floor models. Equipped with a storage boiler, in which two coils. Interaction with solar collectors. Features Madeira Solar KRBS MV 12:
- Heating capacity - 12.6 kW.
- 105% efficiency.
- There is flame modulation, auto ignition.
- Built-in boiler with a capacity of 300 liters.
- Weight - 276 kg.
- The cost is 200,000 rubles.
The package includes a burner fan with speed control. There is a three-speed circulation pump, expansion tank for domestic hot water at 12 l, for heating at 8 l.
Malfunctions
Any equipment, including highly reliable European boilers, periodically needs maintenance and fails. Given domestic operating conditions, Italian technology requires increased attention. The instructions and the connection diagram will help to understand the heater device. The most common problems:
- The wick does not light up. This problem often occurs after several seasons of operation. Users cannot light the burner once, they have to try again and again. The temperature is set to the maximum. And if you turn on the hot water supply, the burner will go out again, the red light is on. To fix the problem, replace the smoke relay - this can be done even without calling the wizard. Relay - a round plastic part.
- The flame is intermittent or completely absent. The fan may need cleaning.
- Unstable work. A lot of fuel is consumed. Most often, the problem is caused by unstable fuel pressure. It is necessary to invite a specialist to check the heating system.
- A leak appeared, pressure disappeared. Check the expansion tank, there may be a problem in it. A sufficient level is 1.8 atm, periodically it needs to be checked.
- A sharp jump in pressure and temperature. Check the connecting pipe of the expansion tank, it happens that the pipe is bent during installation and excess coolant is collected in it.
Reviews
Antea CTFS 24 AF: Ilya S., Samara
Two circuits - drowns and heats water. He worked for three winters without problems, the hot water supply worked normally. In the fourth year, problems arose. I set the heating temperature to 48 degrees. From 40 to 54 heats up quickly - in 20 seconds, and in the same time it again decreases to 40. And so in a circle. I read that it is necessary to increase the pressure in the expansion tank to one and a half bar. Did not help. Heats quickly and cools quickly. The error does not appear on the screen. I live in an area far from service.
Flores Dual CTN 24 AFX: Peter O., Yekaterinburg
Clear and quiet operation. There are no failures, excellent water heating. For three years of operation, no complaints. Saves gas consumption, after buying a new heater they began to pay less for gas. It works even with the smallest gas pressure - up to 5-6 mbar. The heat exchanger is bithermic, but it heats water well with any flow. We annually carry out after-sales service.
The manufacturer Fondital, arguing that its products are adapted to Russian conditions, may be exaggerating. Most problems are associated with harsh operating conditions. The second cause of malfunctions is installation errors, self-intervention in the operation of the equipment and violation of the operating rules. If we discard these nuances, the Fondital gas equipment is worthy of praise: it is distinguished by high-quality assembly, functionality, environmental friendliness and affordable price.