There is a drain filter in each SM, and it is necessary to clean it, and with enviable frequency. If this is your first encounter and you don’t even know where the filter is located in the washing machine, you will have to figure it out.
Just say that this part has a lot of names, experts call it a drain and drain filter, and ordinary people often call it garbage. When you remove it from the typewriter, you will immediately understand how it deserves such a name.
Why do I need cleaning
Cleaning is necessary for a number of reasons:
- This is provided by the manufacturer. Cleaning rates: at least 1 time in 3 months.
- The machine does not drain the water.
- The machine displays an error code corresponding to the lack of water drain.
In all these cases, you do not need to try to restart the machine in the hope of a failure, but do cleaning.
Part Location
Not sure where the filter is? In almost all models of washing machines, the location of the filters is the same: below. It is hidden by a small panel - a service (technical) hatch, which will be easy to open.
It would seem that it is enough to open the door and pull out the filter — but not so simple. There may be difficulties, which we will discuss later.
How to remove the filter
Do you know which way to unscrew the water filter? In 95% of cases, you need to twist counterclockwise.
In some models of washing machines, before you remove the filter, you need to unscrew the special fixing screw. If your hands have not reached the last six months or a year before cleaning the system, then getting it can also be very problematic.
Important! If you are unable to unscrew the drain plug, calculate the strength so as not to tear out the handle or damage the thread or the part itself.
If you still cannot remove the part, do not despair - it can be reached from the drainage pump. It will take a little disassembly of the case.
Of course, there are cases when it is not possible to unscrew it from the inside either due to the strong scale on the thread. In this case, you can try to get the filter together with the snail. After that, it will be much more convenient to get it with a tool or pull it out by force.
If you pull out or break out the filter, then it will not work to put it back, you will have to buy a new one. If the snail suffers, you will have to buy it too.
Important! Before carrying out work, substitute a container or lay a rag so that the rest of the water from the washing machine does not spill directly onto the floor.
Cleaning
You still managed to remove the filter, now you need to check and clean it. Just inspecting visually for cracks will be enough, and then immediately start cleaning.
First you need to clean the filter mechanically - removing dirt and debris from it. After you finish cleaning the element, rinse it under running water from the tap (preferably, the water is warm).
Pay attention to the hole in which the filter stands: it can also collect litter over time. Shine with a flashlight or a phone, get everything you need.
Now you can assemble the machine. And to make sure that everything is done correctly, start a test wash - if the machine drains the water without problems and a puddle does not form below, then everything is in order.
Useful Tips
How to clean the filter if you cannot unscrew it?
In this case, you will have to remove some of the walls of the washer - it depends on the brand and model. If you have Ardo, Virpul, Kandy, LG or Ariston (Hotpoint Ariston), then the easiest way to get the part from the bottom. In many models of these brands there is not even a bottom, and in some it is easily removed.
If you prefer brands like AEG, Bosch or Siemens, then you can get inside only from the front wall.
The Electrolux and Zanussi washing machines are special, it is easiest to open the case there - you need to remove the back panel by unscrewing only 4 screws.
If the design of your SMA does not include a filter component in the drainage system, you need to open the case and look for the cochlea, since clogging may form in the nozzle or drainage pump.
In this video you will clearly see how to clean the drain filter: